submerged arc welding

Study on Submerged Arc Welding of AISI 304

AISI304钢埋弧焊工艺的研究

Development of Submerged Arc Welding Wires for High Performance Pipeline Steel

我国高性能管线钢埋弧焊焊丝的研究进展

According to the construction prosperities of the DZL series of boiler, through installing the submerged arc welding prow onto the special technological equipment, can realize automatic welding on the final inner loop.

根据DZL系列锅炉筒体结构的特点，将埋弧焊机头安装在特定的工艺装备上，使总装内环缝实现了自动焊。

Automatic Submerged Arc Welding of the Semispherical Multisegment Style Heads

多瓣式半球形封头的埋弧自动焊

Automatic submerged arc welding is the method for medium/ thick plate welding, but it mainly to be used in flat welding and fillet welding.

埋弧自动焊是焊接中厚板常用的焊接方法，但常规用在平、角焊位置的焊接。

Now submerged arc weld has been one of most widespread application in the numerous welding process.

埋弧焊是目前众多焊接方法中应用最广泛的工艺方法之一。

The tensile strength of the joint of pulse submerged arc welding is 50 MPa higher than that of ordinary submerged arc welding, which is about 12% higher. Under the same heat input, there is failed test piece in the ordinary submerged arc welding.

脉冲埋弧焊比普通埋弧焊在抗拉强度上增50MPa，大约12%左右，普通埋弧焊在与脉冲埋弧焊同样的热输入条件下出现了不合格试件。

Process Test and Application of Submerged Arc Welding in Stainless Railway Tank Truck

不锈钢铁路罐车的埋弧自动焊工艺试验及应用

Seam tracking control system and development trend of submerged arc welding

埋弧焊焊缝跟踪控制系统及发展状况

Common malfunction analysis and parameter regulation of automatic submerged arc welding machine.

自动埋弧焊机常见故障分析及参数调整.

In the process of submerged arc welding of spiral slits, welding defects may occur because the oxidized iron sheets in the course of welding may cause messy welding seams.

在螺旋缝埋弧焊生产过程中，由于带钢表面氧化铁皮进入焊接过程，往往会造成焊缝夹杂，出现焊接缺陷。

In this paper the HAZ weld thermal cycles of the welding by both sides submerged arc welded steel pipe were reproduced by the dislocation overlap weld method.

采用焊道错位叠加方法，再现了螺旋管双面埋弧焊制管过程中内、外焊焊接热影响区（HAZ）的焊接热循环。

Development of digital control technique on submerged arc welding with magnetrol power source

磁放大器式埋弧自动焊机的数字控制技术

Study on end cracking during one-side submerged arc welding

单面焊时终端裂纹的研究

Investigation in Agglomerative Flux for Narrow-Gap Submerged Arc Welding of Cr-Mo Steel

铬钼钢窄间隙埋弧焊用烧结焊剂的研制

An optimized database system for control of weld bead shape of submerged arc welding on spiral pipes

螺旋埋弧焊管焊缝形状控制与优化数据库

The weldability of D6AC ultra high strength steel is analyzed, and the fundamental of tandem sequence submerged arc welding with thin wire is introduced.

分析了D6AC超高强钢的焊接性，采用细丝双弧焊接方法，进行D6AC超高强钢的双弧焊接工艺试验研究。

This paper studies the tensile properties of stripe and round bar specimens for high grade ( API X65~ X70) spiral submerged-arc welding ( SSAW) steel pipes.

通过试验研究了X65、X70级螺旋埋弧焊钢管不同拉伸试样&板状试样和圆棒试样的拉伸性能。

SCM control technology for submerged arc welding process and it's application

埋弧焊过程的单片机控制技术及其应用

Submerged arc welding with the test welding wire matching sintered flux was carried out to get the deposited metal.

对所研制的焊丝匹配烧结焊剂进行了熔敷金属的埋弧焊试验。

Principle and Application of Submerged Arc Welding with Hot Wire Addition

热丝填充埋弧焊原理及应用

Wheels can walk universally in flat surface and it is indispensable special submerged arc welding equipment.

底部有万向轮能在平面万向行走,是特种埋弧焊接不可缺少的设备.